Windshield wiper and washer switches
The wiper operates only when the ignition switch is in the “ON” or “Acc” position.
See also:
Hill start assist system (MT models)
Ensure that the Hill start assist system
operates properly under the following
circumstances:
1. Stop the vehicle on an uphill grade by
depressing the brake pedal and clutch
pedal, with the ...
Heating
Heating
To direct warm air toward the floor:
1. Set the air inlet selection button to the OFF position.
2. Set the airflow control dial to the “” position.
3. Set the temperature control dial to t ...
Checking the brake pedal free play
1) 0.08 – 0.18 in (2 – 5 mm)
Stop the engine and firmly depress the brake pedal several times. Lightly pull
the brake pedal up with one finger to check the free play with a force of less than
2 ...
