Illustrated index

See also:

Connecting a trailer
1. Remove the receiver cover from the hitch receiver tube. Then insert the ball mount into the hitch receiver tube. 2. Insert the hitch pin into the hole on the hitch receiver tube so that the ...

Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You can also ca ...

Operating the driver’s window
1) Automatically open/close 2) Open/close To open: Press the switch down lightly and hold it. The window will open as long as the switch is held. This switch also has a one-touch auto down fun ...