Air inlet selection button

Select airflow by pressing the air inlet selection button “”.


Select airflow by pressing the air inlet selection button “ON position (recirculation): Interior air is recirculated inside the vehicle.”.


ON position (recirculation): Interior air is recirculated inside the vehicle. Press the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road. The indicator light will illuminate.

OFF position (outside Air): Outside air is drawn into the passenger compartment. Press the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty. The indicator light will turn off.

WARNING

Continued operation in the ON position (recirculation) may fog up the windows. Switch to the OFF position (outside air) as soon as the outside dusty condition clears.

NOTE

When driving on a dusty road or behind a vehicle that emits unpleasant exhaust gases, set the air inlet selection button to the ON position (recirculation).

From time to time, return the air inlet selection button to the OFF position (outside air) to draw outside air into the passenger compartment.

    See also:

    Driving on grades
    ● Before going down a steep hill, slow down and shift into lower gear (if necessary, use 1st gear) in order to utilize the overheating of your vehicle’s brakes. Do not make sudden downshifts ...

    Checking the oil level
    Check the engine oil level at each fuel stop. 1. Park the vehicle on a level surface and stop the engine. Turbo models Non-turbo models 2. Pull out the level gauge, wipe it clean, and in ...

    Coolant temperature low indicator light (if equipped)/Coolant temperature high warning light (if equipped)
    - After turning the ignition switch to the “ON” position, if this indicator light/warning light behaves under any of the following conditions, the electrical system may be malfunctio ...