See also:

Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. ...

Meter needles/gauge illumination setting (models with type A combination meter)
When the setting is activated or deactivated, the meter needles and gauge illuminate and turn off as follows. Activated: When the driver’s door is opened while the ignition switch is in the “L ...

Corrosion protection
Refer to “Corrosion protection”. ...