See also:

Trunk light (Legacy)
1. Push both sides of the light cover, and then remove the cover by pulling it out. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

Tether anchorage location
Legacy Three tether anchorages are installed on the rear shelf behind the rear seat head restraint. Open the cover flap to use each anchorage. Three tether anchorages, i.e., ones for the right, ...

ABS warning light
The ABS warning light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. This is an indication that the ABS system is working properl ...