Windshield wiper and washer switches
The wiper operates only when the ignition switch is in the “ON” or “Acc” position.
See also:
Replacing an air filter
1. Remove the glove box.
(1) Open the glove box.
(2) Remove the damper shaft from the glove box.
(3) Pull out the glove box.
2. Remove the air filter.
3. Replace the air filter element wi ...
Tone and balance control
Type A and B audio
Type C audio
Each brief press of the sound control dial changes the control modes in the following sequence.
Choose the desired level for each mode by turning the sound control ...
Windshield wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in
the direction shown in t ...