Vehicle Dynamics Control OFF indicator light (yellow)

• This light illuminates when the Vehicle Dynamics Control OFF switch is pressed (except STI).

• This light illuminates when the Vehicle Dynamics Control mode switch is pressed for more than 2 seconds (STI).

• The light illuminates when the Vehicle Dynamics Control system is deactivated.

NOTE
• The light may remain illuminated for a while after the engine has been started, especially in cold weather. This does not indicate the existence of a problem. The light should turn off as soon as the engine has warmed up.

• The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/ malfunction indicator lamp is on.

The Vehicle Dynamics Control system is probably malfunctioning under the following condition. Have your vehicle checked at a SUBARU dealer as soon as possible.

• The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started.

    See also:

    Canceling the function for meter/gauge needle movement upon turning on the ignition switch
    It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position. Turn the ignition switch to th ...

    Replacement of brake pad and lining
    The right front disc brake and the right rear disc brake have audible wear indicators on the brake pads. If the brake pads wear close to their service limit, the wear indicator makes a very audible ...

    Illumination brightness control
    The illumination brightness of the clock display, audio, air conditioner, multi function display and meter/gauge dims under the following conditions. ● when the light switch is in the “ ” o ...