See also:

Rear combination lights
1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 2. Slide the rear combination light assembly rearward and remove it from ...

Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the “ON” position then move the select lever to the “P” position with the brake pedal depressed. If the select lever does not ...

When “CHECK DEVICE” is displayed
This message is displayed under the following conditions. • When there is a short in the USB bus • When a non-corresponding device (for example a USB mouse) is connected • When a non-corresponding ...