See also:

System setup
You can select the following menus only by operating the “TUNE/TRACK/CH” dial. ...

Outback
1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens. 6. Tighten the mounting screw ...

Vehicle Dynamics Control OFF switch
Pressing the switch to deactivate the Vehicle Dynamics Control system can facilitate the following operations. ● a standing start on a steeply sloping road with a snowy, gravel-covered, or ...