ABS system self-check
Just after the vehicle is started, you may feel on the brake pedal a vibration similar to when the ABS operates, and you may also hear the sound of the ABS working from the engine compartment. This is caused by an automatic functional test of the ABS system being carried out and does not indicate any abnormal condition.
See also:
Inspection
Perform the following steps at least twice a year to check the release handle
for correct operation.
1. Open the trunk lid.
2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...
Drive belts
1) Power steering oil pump pulley
2) Front side belt
3) Alternator pulley
4) Air conditioner compressor pulley
5) Rear side belt
6) Crank pulley
A) 22 lbf (98 N, 10 kgf)
The front side be ...
To install the cover housing
1. Shorten the bar.
2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers. ...