Redial

1. Select the “REDIAL” menu.

2. Press the OFF hook switch 3. Select the desired number by turning.

3. Select the desired number by turning the “TUNE/TRACK/CH” dial.

4. Perform either of the following procedures.

– Press the OFF hook switch – Press the “TUNE/TRACK/CH” dial,.

– Press the “TUNE/TRACK/CH” dial, then select the “DIAL” menu.

    See also:

    Replacing bulbs
    WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down, Otherwise, there is the risk of sustaining a burn injury. CAU ...

    Synthetic oil
    You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade s ...

    Rear combination lights
    Legacy NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. 1. Turn the knobs of the cover 90 degrees counterclockwis ...