See also:

Checking the fluid level
Check the fluid level on the outside of the reservoir. If the level is below “MIN” level mark, add the recommended clutch fluid to “MAX” level mark. Use only clutch fluid from a sealed container. ...

Replacement of wiper blades
Grease, wax, insects, or other materials on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the wind ...

If you have accidentally triggered the alarm system
To stop the alarm Perform any of the following operations. ● Press any button on the remote transmitter. ● Turn the ignition switch to the “ON” position. ...