When “NO USB” is displayed (type D audio)
This message is displayed under the following conditions.
- No USB storage devices/iPod® are connected.
- A non-connectable USB storage device/ iPod® is connected.
Connect a connectable USB storage device/iPod®.
See also:
Voice command system
Talk switch
To turn on the voice command system, press the talk switch
briefly. To turn off the voice command
system, press the talk switch for more
than 1.5 seconds.
The commands available ...
Compass zone adjustment
Compass calibration zones
1. The zone setting is factory preset to
Zone 8. Refer to the “Compass calibration
zones” map shown above to verify that the
compass zone setting is correct for yo ...
Programming the transmitters
The remote keyless entry system is equipped with a special code learning feature
that allows you to program new transmitter codes into the system or to delete old
ones. The system can learn up to ...
