When there are CDs loaded (type B)
Press a desired one of the disc select
buttons (from 
to
) the disc
number indicator of which steadily lights
up. The player will then start playback of
the selected CD, beginning with the first
track.
If a disc that the player cannot read has been loaded, the player will display the message “CHECK DISC”.
See also:
Removing and reinstalling clips
Removing clips
There are several types of clips used for your vehicle
Type A clips
1. Turn the clips counterclockwise using a flat-head screwdriver until the center
portion of the clip is raise ...
Windshield wiper blade assembly
1. Raise the wiper arm off the windshield.
1) Open the cover
2) Pull down the wiper blade
2. Remove the wiper blade assembly by opening the cover and pulling it down in
the direction shown in t ...
Drive belts
It is unnecessary to check the deflection of the drive belt periodically because
your engine is equipped with an automatic belt tension adjuster. However, replacement
of the belt should be done ac ...