See also:

Turbo models
1) Air intake duct 2) Air cleaner case 3) Clamp 1. Remove the hydraulic hose in the power steering system from the clip on the air intake duct. 2. Remove the hydraulic hose from the clip on the ...

Compass zone adjustment
Compass calibration zones 1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geograp ...

Inspection
Perform the following steps at least twice a year to check the release handle for correct operation. 1. Open the trunk lid. 2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...