For AT models - All-Wheel Drive warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners Manual - Subaru Legacy - SubaruManuals.org

Follow me on Twitter!

For AT models

Subaru Legacy / Subaru Legacy Owners Manual / Instruments and controls / Warning and indicator lights / All-Wheel Drive warning light (AT and CVT models) / For AT models

This light flashes if the vehicle is driven with tires of different diameters fitted on its wheels or with the air pressure excessively low in any of its tires.

See also:

Trunk light
1. Remove the cover by squeezing its sides and pulling it. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

Installing the wheel cover
Installing the wheel cover Align the valve with the valve hole in the cover, then fit the cover on the wheel by tapping your hand evenly around the circumference of the cover. ...

Dome light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. 3. Pull the bulb straight downward to ...