Subaru Outback (BR): Other markings
The following makings are also placed on the sidewall.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which this tire may be inflated. For example, “350 kPa (51 PSI) MAX. PRESS”
Maximum load rating
The load rating at the maximum permissible weight load for this tire. For example, “MAX. LOAD 615 kg (1,356 LBS) @ 350 kPa (51 PSI) MAX. PRESS.”
WARNING
Maximum load rating applies only to the tire, not to the vehicle. Putting a load rated tire on any vehicle does not mean the vehicle can be loaded up to the tire’s rated load.
Construction type
Applicable construction of this tire. For example, “TUBELESS STEEL BELTED RADIAL”
Construction
The generic name of each cord material used in the plies (both sidewall and tread area) of this tire. For example, “PLIES: TREAD 2 STEEL + 2 POLYESTER + 1 NYLON SIDEWALL 2 POLYESTER”
Uniform Tire Quality Grading (UTQG)
For details, refer to “Uniform tire quality grading standards” F13-14.
READ NEXT:
Recommended cold tire inflation pressure
For the recommended cold tire inflation pressure for your vehicle’s tires, refer
to “Tires” F12-8.
Vehicle placard
The vehicle placard is affixed to the driver’s side B-pillar.
Example:
The vehicle placard shows original tire size, recommended cold tire inflation
pressure on each tire at maximum loaded v
SEE MORE:
Engine oil
NOTE
● When the engine low oil level warning light illuminates, have your vehicle
inspected by your SUBARU dealer as soon as possible.
● The engine oil consumption rate is not stabilized, and therefore cannot be
determined until the vehicle has traveled at least several thousand
Wheel Alignment (inspection, adjustment)
A: INSPECTION
Check the following items before performing the wheel alignment measurement.
Tire inflation pressure
Uneven wear of RH and LH tires, or difference of sizes
Tire runout
Excessive play and wear of ball joint
Excessive play and wear of tie-rod end
Excessiv
