See also:

High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the combination meter is also on. To switch b ...

Checking the coolant level
Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “LOW” level mark, ad ...

Removing and reinstalling clips
Removing clips There are several types of clips used for your vehicle Type A clips 1. Turn the clips counterclockwise using a flat-head screwdriver until the center portion of the clip is raise ...