See also:

5-door models
1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 2. Slide the rear combination light assembly rearward and remove it from the ve ...

License plate light
1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the cover and lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens and cover. 6. Tighte ...

Channel selection by pressing the button
When in the SAT mode, briefly press the “SEEK” button “” or “” to select the channel. ...