See also:

Outback
1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens. 6. Tighten the mounting screw ...

Dome light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. 3. Pull the bulb straight downward to ...

Trunk light
1. Remove the cover by squeezing its sides and pulling it. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...