See also:

If you have accidentally triggered the alarm system
To stop the alarm Perform any of the following operations. ● Press any button on the remote transmitter. ● Turn the ignition switch to the “ON” position. ...

Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold ...

High beam light bulbs
Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 2. Disconnect the electrical connector from the bulb. 3 ...