See also:

When “CHECK DEVICE” is displayed
This message is displayed under the following conditions. • When there is a short in the USB bus • When a non-corresponding device (for example a USB mouse) is connected • When a non-corresponding ...

Door step light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens. ...

Checking the coolant level
Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “LOW” level mark, ad ...