See also:

Gear position indicator setting (MT models)
The gear position indicator light can be activated or deactivated by performing the following procedure. 1. Turn the ignition switch to the “LOCK” position. 2. Press the trip knob to show “ ” or “ ...

Seat fabric
Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum it. Wipe the fabric surface with a ti ...

START
CAUTION Do not turn the ignition switch to the “START” position while the engine is running. The engine is started in this position. The starter cranks the engine to start it. When the key is rele ...