D (Drive)

This position is for normal driving.

The transmission automatically shifts into a suitable gear from 1st to 4th according to the vehicle speed and the acceleration you require.

When more acceleration is required in this position, depress the accelerator pedal fully to the floor and hold that position. The transmission will automatically downshift to 3rd, 2nd or 1st gear. When you release the pedal, the transmission will return to the original gear position.

To use the “SPORT” mode, move the lever from this position into the manual gate. To use the manual mode, move the lever from this position into the manual gate then move it toward the “+” and “−” ends.

    See also:

    Fan speed control dial
    The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds. ...

    Battery drainage prevention function
    If a door or the rear gate (Outback) is not completely closed, the interior lights will remain illuminated as a result. However, several lights are automatically turned off by the battery drainage ...

    Lubricants
    Engine oil For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-12. NOTE The procedure for changing the engine oil and oil filter should be performed by ...