See also:

Inspection
Perform the following steps at least twice a year to check the release handle for correct operation. 1. Open the trunk lid. 2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...

Shock sensors (dealer option)
The shock sensors trigger the alarm system when they sense impacts applied to the vehicle and when any of their electric wires are cut. The alarm system causes the horn to sound and the turn signal li ...

When you do not tow a trailer
● Remove the ball mount from the hitch receiver tube and insert the receiver cover onto the hitch receiver tube. ● Place the dust cap over the four-pin connector of the hitch wire harne ...