Auto-store (type D audio)
Using the Auto-store function, you can
automatically store 6 stations on the
current waveband (FM-AS or AM-AS) by
pressing the 
button for 1.5 seconds
or longer. Use Auto-store to quickly find
the strongest stations, for example when
traveling through different reception areas.
NOTE
- When the HD Radio function is
turned on, Auto-store cannot be used
while receiving the broadcasting station
with SPS (Supplemental Program
Service).
- When you use Auto-store, the new stations replace any stations previously stored.
- Interrupting Auto-store: If you accidentally
press the (Auto-store)
button, you can cancel the Auto-store
function before it has been completed
as follows.
– switching to the other source mode
– pressing the button
– switching to the other band
– turning the “TUNE/TRACK/CH” dial
– pressing the “SCAN” button
See also:
FM/AM selection
Type A and B audio
Type C audio
Push the “FM/AM” button when the radio is off to turn on the radio.
Push the “FM/AM” button when the radio is on to select FM1, FM2, FM3 or AM reception.
Each brief ...
Maximum allowable speeds
The following table shows the maximum speeds that are possible with each different gear. The tachometer’s needle will enter the red area if these speeds are exceeded.
With the exception of cases wher ...
Seat fabric
Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum it.
Wipe the fabric surface with a ti ...