AT OIL TEMP warning light (AT and CVT models)
The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.
See also:
Tire inspection
Check on a daily basis that the tires are
free from serious damage, nails, and
stones. At the same time, check the tires
for abnormal wear.
Contact your SUBARU dealer immediately
if you find ...
Symmetrical All-Wheel Drive A Key To Brand Identity
Subaru offers three different Symmetrical All-Wheel Drive systems in the 2010
Subaru Legacy line, each tailored to the engine and type of transmission. In
Legacy 2.5i models equipped with the 6-sp ...
Driving tips
Do not drive with your foot resting on the clutch pedal and do not use the clutch
to hold your vehicle at a standstill on an upgrade. Either of those actions may
cause clutch damage.
Do not drive ...