To use as full-automatic climate control system

1. Place the temperature control dial in the position for the preferred temperature.

2. Set the airflow control dial and fan speed control dial in the “AUTO” position.

The system’s functions will then switch to AUTO mode and be controlled automatically.

- Airflow control dial: AUTO position
- Fan speed control dial: AUTO position

    See also:

    Engine overheating
    WARNING Never attempt to remove the radiator cap until the engine has been shut off and has fully cooled down. When the engine is hot, the coolant is under pressure. Removing the cap while the en ...

    Wheel balance
    Each wheel was correctly balanced when your vehicle was new, but the wheels will become unbalanced as the tires become worn during use. Wheel imbalance causes the steering wheel to vibrate sli ...

    High beam light bulbs
    1. Remove the air intake duct (right-hand side). For the method to remove the air intake duct, refer to “Removing air intake duct” F11-7. Left-hand side 2. Use a screwdriver to remove the secure ...