Seat, seatbelt and SRS airbags

See also:

Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the com ...

Select lever
The select lever has four positions, “P”, “R”, “N”, “D” and also has a manual gate for using the manual mode. ...

Rear combination lights
1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 2. Slide the rear combination light assembly rearward and remove it from ...