See also:

Using a flat-bed truck
This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the select lever into the “P” position for AT and CVT models or the shift le ...

Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs. 1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced. 2. Stop the eng ...

Vehicle Dynamics Control OFF mode
This mode allows only the ABS control. This mode should be used in an emergency situation such as getting out of snow or mud. When the switch is pressed for more than approximately 3 seconds during ...