Jump starting

• Battery fluid is SULFURIC ACID.

• Battery fluid is SULFURIC ACID.

Do not let it come in contact with the eyes, skin, clothing or the vehicle.

If battery fluid gets on you, thoroughly flush the exposed area with water immediately. Get medical help if the fluid has entered your eyes.

If battery fluid is accidentally swallowed, immediately drink a large amount of milk or water, and obtain immediate medical help.

Keep everyone including children away from the battery.

• The gas generated by a battery explodes if a flame or spark is brought near it. Do not smoke or light a match while jump starting.

• Never attempt jump starting if the discharged battery is frozen. It could cause the battery to burst or explode.

• Whenever working on or around a battery, always wear suitable eye protectors, and remove metal objects such as rings, bands or other metal jewelry.

• Be sure the jumper cables and clamps on them do not have loose or missing insulation.

Do not jump start unless cables in suitable condition are available.

• A running engine can be dangerous.

Keep your fingers, hands, clothing, hair and tools away from the cooling fan, belts and any other moving engine parts.

Removing rings, watches and ties is advisable.

• Jump starting is dangerous if it done incorrectly. If you are unsure about the proper procedure for jump starting, consult a competent mechanic.

When your vehicle does not start due to a run down (discharged) battery, the vehicle may be jump started by connecting your battery to another battery (called the booster battery) with jumper cables.

See also:

Tech Features
The optional navigation system includes a large screen with excellent graphics and plenty of street labels, but some simple actions — canceling route guidance, for instance — require an excessive ...

Opening the trunk lid (Legacy)
The trunk lid opens when the “” button is pressed continuously for at least 2 seconds. An electronic chirp will sound twice and the turn signal lights will flash twice. ...

Ventilation
To force outside air through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position. 2. Press the “” button. 3. Set the temperature control dial all the way left. ...