See also:

High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light “” on the combination meter is also on. To switch b ...

Using the select lever
Shift to the next-higher gear by briefly pushing the select lever toward the “+” end of the manual gate. Shift to the next-lower gear by briefly pulling the select lever toward the “−” end of ...

Changing the coolant
Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boilin ...