See also:

Operating the windows
To open: Press the switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. When the lock s ...

Low beam light bulbs
1. Pull off the fender lining. For details, refer to “Pulling off the fender lining” F11- 7. 2. Remove the bulb cover, by turning it counterclockwise. 3. Disconnect the electrical connector. ...

Turbo models
1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. 1) Connector 2) Clip 2. Unplug the connector that is attached to the top of the air cleaner case. ...