Air inlet selection button

ON position (recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position.
Air inlet selection button

ON position (recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position.

The indicator light will illuminate.

Place the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road.

OFF position (outside air): Outside air is drawn into the passenger compartment.

Push the air inlet selection button again to the OFF position. The indicator light will turn off.

Place the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty.

Continued operation with the air inlet selection button in the ON position may fog up the windows.

Continued operation with the air inlet selection button in the ON position may fog up the windows.

Switch to the OFF position as soon as the outside dusty condition clears.

    See also:

    Lubrication oil circulation in the refrigerant circuit
    Operate the air conditioner compressor at a low engine speed (at idle or low driving speeds) a few minutes each month during the off-season to circulate its oil. ...

    Exterior
    The redesigned Legacy gets a modern, aggressive look. Subaru's well-known grille with a wing-shaped crossbar and constellation symbol looks fresh when applied to the new body. The halogen headligh ...

    Front passenger’s SRS frontal airbag
    The front passenger’s SRS frontal airbag uses a dual stage inflator. The inflator operates in different ways depending on the severity of impact. The total load on the seat is monitored by the pass ...