Ignition switch light
For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry transmitter.
The light remains illuminated for several tens of seconds and then gradually turns off under the following conditions.
• when the driver’s door is closed
• when the doors are unlocked using the remote keyless entry transmitter
The light turns off immediately under the following conditions.
• when the ignition switch is turned to the “ON” position
• when all doors and the rear gate (5- door) are locked using the remote keyless entry transmitter
See also:
Outback
1. Remove the mounting screws using a Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the lens.
6. Tighten the mounting screw ...
Waxing and polishing
Always wash and dry the vehicle before
waxing and polishing.
Use a good quality polish and wax and
apply them according to the manufacturer’s
instructions. Wax or polish when
the painted surf ...
Checking the brake pedal free play
1) 0.08 – 0.18 in (2 – 5 mm)
Stop the engine and firmly depress the brake pedal several times. Lightly pull
the brake pedal up with one finger to check the free play with a force of less than
2 ...
