Cleaning ventilation grille

Cleaning ventilation grille
Cleaning ventilation grille

Always keep the front ventilation inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting.

Since the condenser is located in front of the radiator, this area should be kept clean because cooling performance is impaired by any accumulation of insects and leaves on the condenser.

    See also:

    If no steam is coming from the engine compartment
    NOTE For details about how to check the coolant level or how to add coolant, refer to “Engine coolant” F11-17. 1. Keep the engine running at idling speed. 2. Open the hood to ventilate the engine ...

    High beam light bulbs
    1. Remove the air intake duct (right-hand side). For the method to remove the air intake duct, refer to “Removing air intake duct” F11-7. Left-hand side 2. Use a screwdriver to remove the secure ...

    Immobilizer system
    This light blinks approximately 60 seconds after the ignition switch is turned from “ON” position to the “Acc” or “LOCK” position or immediately after the key is pulled out. Refer to “Immobilizer” ...