Fuse panel located in the engine compartment

A) Main fuse


A) Main fuse



Bulb chart


    See also:

    AT models
    The key can be turned from “Acc” to “LOCK” only when the select lever is in the “P” position. ...

    Gear position indicator setting (MT models)
    The gear position indicator light can be activated or deactivated by performing the following procedure. 1. Turn the ignition switch to the “LOCK” position. 2. Press the trip knob to show “ ” or “ ...

    Outback
    1. Remove the mounting screws using a Phillips screwdriver. 2. Remove the lens. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the lens. 6. Tighten the mounting screw ...