See also:

Gear position indicator setting (MT models)
The gear position indicator light can be activated or deactivated by performing the following procedure. 1. Turn the ignition switch to the “LOCK” position. 2. Press the trip knob to show “ ” or “ ...

Turbo models
1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct. 1) Connector 2) Clip 2. Unplug the connector that is attached to the top of the air cleane ...

Select lever
The select lever has four positions, “P”, “R”, “N”, “D” and also has a manual gate for using the manual mode. ...