See also:

Initializing the registered data
To initialize the registered data, perform the following procedure. 1. Select the “INITIALIZE” menu. 2. Select the “CONFIRM” menu. First “PLEASE WAIT”, then “INITIALIZED” is displayed. The reg ...

Windshield wiper blade assembly
1. Raise the wiper arm off the windshield. 1) Open the cover 2) Pull down the wiper blade 2. Remove the wiper blade assembly by opening the cover and pulling it down in the direction shown in t ...

Air inlet selection button
ON position (recirculation): Interior air is recirculated inside the vehicle. Press the air inlet button to the ON position. The indicator light will illuminate. Place this button in the ON posit ...