Windshield wiper and washer switches
Subaru Legacy / Subaru Legacy Owners Manual / Instruments and controls / Wiper and washer / Windshield wiper and washer switches
The wiper operates only when the ignition switch is in the “ON” position.
See also:
Non-turbo models
1) Connector
2) Clip
3) Clamp
4) Air intake boot
5) Clip
1. Unplug the connector that is attached to the top of the air cleaner case.
2. Detach the connector cable from the clip on the right s ...
Trunk light (Legacy)
1. Push both sides of the light cover, and then remove the cover by pulling it
out.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the cover. ...
Heating
To direct warm air toward the floor:
1. Set the air inlet selection button to the OFF position.
2. Press the “” button.
3. Set the temperature control dial to the most comfortable level.
4. Set th ...