Safety symbol

You will find a circle with a slash through it in this manual. This symbol means “Do not”, “Do not do this”, or “Do not let this happen”, depending upon the context.

    See also:

    Trunk light
    1. Remove the cover by squeezing its sides and pulling it. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the cover. ...

    Power seat (if equipped)
    WARNING To prevent the passenger from sliding under the seatbelt in the event of a collision, always put the seatback in the upright position while the vehicle is in motion. Also, do not place ...

    Rear window wiper blade assembly
    1. Raise the wiper arm off the rear window. 2. Turn the wiper blade assembly counterclockwise. 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. 4. Install the wiper ...