Checking the brake pedal free play

1) 0.02 Ц 0.08 in (0.5 Ц 2.0 mm)

1) 0.02 Ц 0.08 in (0.5 Ц 2.0 mm)

Stop the engine and firmly depress the brake pedal several times. Lightly pull the brake pedal up with one finger to check the free play with a force of less than 2 lbf (10 N, 1 kgf).

If the free play is not within proper specification, contact your SUBARU dealer.

    See also:

    ABS warning light
    The ABS warning light illuminates when the ignition switch is turned to the УONФ position and turns off after approximately 2 seconds. This is an indication that the ABS system is working properl ...

    Cooling system
    Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boilin ...

    ABS system self-check
    You may feel a slight shock in the brake pedal and hear the operating sound of ABS from the engine compartment just after the vehicle is started. This is caused by an automatic functional test of ...