See also:

Inspection
Perform the following steps at least twice a year to check the release handle for correct operation. 1. Open the trunk lid. 2. Use a flat-head screwdriver with a thin blade. Slide the flat-head ...

How to jump start
1. Make sure the booster battery is 12 volts and the negative terminal is grounded. 2. If the booster battery is in another vehicle, do not let the two vehicles touch. 3. Turn off all unnecess ...

Tether anchorage location
Outback Three tether anchorages, i.e., ones for the right, center and left positions, are already installed on the rear edge of the roof. Open the cover flap to use each anchorage. ...