See also:

To disengage the service mode
Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote engine start transmitter three times. The system will pause for 1 se ...

Compass zone adjustment
Compass calibration zones 1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for yo ...

Airflow control dial
Airflow control dial Each dial position activates the following air outlets. AUTO: The airflow control is adjusted automatically in accordance with the air temperature inside and outside the ...