Cooling system

Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed.

Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed.

Х Vehicles are filled at the factory with SUBARU Super Coolant that does not require the first change for 11 years/137,500 miles (11 years/220,000 km). This coolant should not be mixed with any other brand or type of coolant during this period. Mixing with a different coolant will reduce the life of the coolant. Should it be necessary to top up the coolant for any reason, use only SUBARU Super Coolant.

Х Vehicles are filled at the factory with SUBARU Super Coolant that does not require the first change for 11 years/137,500 miles (11 years/220,000 km). This coolant should not be mixed with any other brand or type of coolant during this period. Mixing with a different coolant will reduce the life of the coolant. Should it be necessary to top up the coolant for any reason, use only SUBARU Super Coolant.

If the SUBARU Super Coolant is diluted with another brand or type, the maintenance interval is shortened to that of the mixing coolant.

Х Do not splash the engine coolant over painted parts. The alcohol contained in the engine coolant may damage the paint surface.

See also:

AT OIL TEMP warning light (AT models)
If this light illuminates when the engine is running, it may indicate that the automatic transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop ...

Maximum load rating
The load rating at the maximum permissible weight load for this tire. For example, УMAX. LOAD 580 kg (1279 LBS) @ 300 kPa (44 PSI) MAX. PRESS.Ф Maximum load rating applies only to the tire, not ...

Non-turbo models
Non-turbo models 1) Connector 2) Clip 3) Clamp 4) Air intake boot 5) Clip 1. Unplug the connector that is attached to the top of the air cleaner case. 2. Detach the connector cable from ...