See also:

Compass zone adjustment
Compass calibration zones 1. The zone setting is factory preset to Zone 8. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geograp ...

Replacing bulbs
Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. Replace an ...

When “CHECK DEVICE” is displayed
This message is displayed under the following conditions. - When there is a short in the USB bus - When a non-corresponding device (for example a USB mouse) is connected - When a non-correspo ...