Entering the vehicle while it is running via remote start

1. Unlock the vehicle doors using the remote keyless entry system. If the vehicles doors are unlocked manually using the key, the vehicles alarm system will trigger and the remote engine start system will turn off. Inserting the key into the ignition switch and turning it to the ON position or pressing the unlock button 2. Enter the vehicle. Do not depress the brake pedal. on the remote keyless entry transmitter will disarm the alarm system. Refer to Alarm system.

2. Enter the vehicle. Do not depress the brake pedal.

3. Insert the key into the ignition switch and turn to the ON position. If the ignition switch is accidentally turned to the START position, the systems starter anti-grind feature will prevent the starter from re-cranking.

4. Depress the brake pedal. The remote starter disengages, the vehicles power window features are re-enabled and the vehicle will operate normally.

    See also:

    Compass calibration
    1. For optimum calibration, switch off all nonessential electrical accessories (rear window defogger, heater/air conditioning system, spotlight, etc.) and ensure all doors are shut. 2. Drive to an op ...

    Tire rotation direction mark
    Example of tire rotation direction mark 1) Front If the tire has the rotation direction specification, the tire rotation direction mark is placed on its sidewall. When you install a tire that has t ...

    Wiper intermittent time control
    Wiper intermittent time control When the wiper switch is in the position, turn the dial to adjust the operating interval of the wiper. The operating interval can be adjusted in nine steps. ...