How to eject CDs from the player (type B)

See also:

To install the cover housing
1. Shorten the bar. 2. Insert the projections located on the both ends of the sleeve into the recesses of the retainers. ...

Map light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

Checking the fluid level
Checking the fluid level 1) “MAX” level mark 2) “MIN” level mark Check the fluid level monthly. Check the fluid level on the outside of the reservoir. If the level is below “MIN”, add the r ...