See also:

High mount stop light (4- door) (except LED [Light Emitting Diode] type)
1. Remove the high mount stop light cover by prying the edge with a screwdriver. 2. Remove the bulb socket from the high mount stop light assembly by turning it counterclockwise. 3. Pull the bulb ...

Arming the system
CAUTION In passive mode, the system will automatically activate the alarm but WILL NOT automatically lock the doors. In order to lock the doors you must either lock them as indicated in step 4 be ...

Pulling off the fender lining
It is necessary to pull off the fender lining when replacing some bulbs. 1. Start the engine and turn the steering wheel fully in the opposite direction of the bulb to be replaced. 2. Stop the eng ...