See also:

Rear center seating position
The head restraint is not intended to be used at the lowest position. Before sitting on the seat, raise the head restraint to the click position. 1) When not used (lowest position) 2) When us ...

Map light
1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Turn the bulb until the flat surfaces at its ends are aligned vertically. Pull the bulb straight downward to r ...

Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic transmission, check to see that the fluid level is between the lower level and upper level on the “COLD” range. If it i ...